Sourcing comparison · Kitchen Appliances

Switching kitchen appliances sourcing from Vietnam to Mexico

$2,638estimated duty & fee savings per year at $100,000 of imports
Rates last verified November 7, 2026

Tariff & fee savings only, assuming equal product cost — your actual landed cost also depends on price and freight, which vary by supplier.

How the saving scales with your volume

linear · equal FOB
Annual import valueEstimated duty & fee savings / year
$50,000$1,319
$250,000$6,594
$1,000,000$26,375

Savings scale linearly with volume. Enter your exact figure to model it.

Calculate your exact volume →

The two tariff stacks, side by side

on a fixed reference customs value
VietnamCurrent source
MFN Base Rate3%
Forced-labor S30112.5%
MPF$36.55
HMF$13.19
Total duties & fees$1,684.99
MexicoCheaper
MFN Base Rate3%
Forced-labor S30110%
MPF$36.55
HMF$13.19
Total duties & fees$1,421.24

Buyers comparing Vietnam and Mexico for kitchen appliances are really comparing two very different duty stacks. Mexico's 13% effective rate undercuts Vietnam's 15.5% by enough to free roughly $2,638 a year at $100,000 of volume. The importers who win this cycle are the ones treating country of origin as a number to optimise, not a given. Below, each tariff layer is laid out for both origins, with the saving scaled to several order sizes.

How the tariff stacks compare

Both stacks share the same customs valuation, so the comparison is apples to apples. On the Vietnam side, Customs applies a 3% Most-Favoured-Nation base duty and a 12.5% forced-labor Section 301 duty on its kitchen appliances, an effective 15.5% once the $49.74 in processing fees are added. Shipped out of Mexico, the product is hit with a 3% Most-Favoured-Nation base duty and a 10% forced-labor Section 301 duty on its kitchen appliances, an effective 13% once the $49.74 in processing fees are added. Two charges are origin-blind — the MPF and HMF, together $49.74 on this entry — which is why the entire difference lives in the duty layers. Net the two and the duty-and-fee difference is $263.75 on a single $10,000 shipment — the 2.5% effective-rate gap in dollars. Multiply across your volume and it is near $659 for $25,000 and about $2,638 for $100,000 a year. A buyer placing $25,000 orders sees about $659 of avoidable duty on each one.

Trade context

Kitchen Appliances (HTS 8509, 8516) covers items such as Coffee makers, Blenders, Microwaves, Air fryers, Instant pots, Toasters, and Dishwashers. For kitchen appliances, where buyers reorder frequently, the duty rate compounds into one of the largest controllable costs on the P&L. On carve-outs: USMCA-qualifying appliances from Mexico can enter at the USMCA rate in place of MFN, but goods in this category that carry a Section 232 tier keep it after a claim (for example, HTS 7323.93.0035 at 25%). Vietnam's trade profile leans toward consumer electronics, clothing garments, and footwear, and it sits in Asia-Pacific. For Vietnam, a negotiated bilateral rate applies on kitchen appliances entries alongside the base and Section 232/301 layers, now that Section 122 has lapsed to 0%. Mexico, in North America, ships the US mainly passenger vehicles, auto parts components, and consumer electronics. Mexico's USMCA membership replaces MFN on qualifying kitchen appliances, with one exception: goods under a Section 232 tier in this category keep that duty after a claim (for example, HTS 7323.93.0035 at 25%). Spanning Asia-Pacific and North America, the two lanes differ in freight and transit, so weigh those against the duty saving. Mexico clears this category at a structurally lower rate than Vietnam, an edge that persists across order cycles rather than a spot-price blip. The figures here reflect the rules in force today; in a year of frequent revisions, the value is in re-running them as policy moves, which this site is built to do.

Recommendation

For $100,000 a year of kitchen appliances, the move from Vietnam to Mexico is worth about $2,638, scaling to $1,319 at $50,000, $6,594 at $250,000, and $26,375 at $1,000,000. The comparison is generated by running the same inputs through the tariff engine for each origin, which keeps everything but the duty layers equal. These figures reflect tariff and fee savings only, assuming equal product cost — your actual landed cost also depends on price and freight, which vary by supplier. Read the $2,638 as a transition budget — if re-sourcing to Mexico costs less than the annual saving, it pays back inside a year. Request parallel quotes from your Vietnam incumbent and a vetted Mexico source, then compare landed cost with the duty gap held constant. Lock the comparison to a quote date; a surcharge added or lifted can change the ranking between negotiation and purchase order. Run your own volume — and a post-Section-122 view — through the interactive Tariff Savings Finder.

Lines that pay a different rate

13 of the 59 HTS lines in this category are on the Section 232 derivative steel and aluminum lists. For those lines the comparison above holds only when the listed metal is under 15 percent of the article's weight.

Above that, a line from Vietnam and the same line from Mexico fall into the same tier: +25% on top of the line's own MFN rate (HTSUS 9903.82.09, 10 lines), or MFN plus Section 232 totaling the higher of the line's MFN and 15% (HTSUS 9903.82.10/.11, 3 lines). The forced-labor Section 301 duty drops off for both origins.

A USMCA claim does not remove this tier. U.S. note 16(b) collects the Section 232 duty in addition to the preferential rate, so a qualifying good from Canada or Mexico on one of these lines still owes it.

Frequently Asked Questions

At $100,000 of annual import value, switching from Vietnam to Mexico saves an estimated $2,638 in duties and fees, because the effective tariff rate falls from 15.5% to 13%. The saving scales linearly with volume. These figures reflect tariff and fee savings only, assuming equal product cost — your actual landed cost also depends on price and freight, which vary by supplier.

Mexico-origin kitchen appliances is assessed a 3% Most-Favoured-Nation base duty and a 10% forced-labor Section 301 duty, for an effective 13% duty rate before the Merchandise Processing Fee ($36.55) and Harbor Maintenance Fee ($13.19).

Vietnam carries an effective 15.5% rate versus 13% for Mexico. The gap comes from differences in the base, Section 232 and bilateral rates that apply to each origin.

13 of the 59 HTS lines in this category are on the Section 232 derivative steel and aluminum lists. For those lines the comparison between Vietnam and Mexico holds only when the listed metal is under 15 percent of the article's weight. Above that, a line from Vietnam and the same line from Mexico fall into the same tier: +25% on top of the line's own MFN rate (HTSUS 9903.82.09, 10 lines), or MFN plus Section 232 totaling the higher of the line's MFN and 15% (HTSUS 9903.82.10/.11, 3 lines). The forced-labor Section 301 duty drops off for both origins. A USMCA claim does not remove this tier. U.S. note 16(b) collects the Section 232 duty in addition to the preferential rate, so a qualifying good from Canada or Mexico on one of these lines still owes it.

Disclaimer: CalcMyTariff.com provides tariff estimates for informational purposes only. Actual duty rates depend on the specific HTS classification of your goods, which requires professional customs brokerage expertise. Rates shown reflect our best interpretation of currently published tariff schedules and may not include all applicable duties, anti-dumping duties, countervailing duties, or special tariffs. Consult a licensed US customs broker for binding determinations. Tariff rates change frequently — verify current rates with CBP or USITC before making import decisions.

Tariff rates from Tax Foundation, USITC, and Penn Wharton Budget Model; retaliatory data from the retaliating governments' official gazettes and registers; industry data from the U.S. Census Bureau (NAICS). Last verified .